xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
70
Example usage:
To configure the amount of time the Switch will wait for a user to authenticate through a console, Telnet, or SSH
application to 60 seconds:
DGS-3627:admin# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
config authen parameter attempt
Purpose This command is used to configure the maximum number of attempts a user can try to login
or promote the privilege on a console, Telnet, or SSH application.
Syntax
config authen parameter attempt <int 1-255>
Description Used to configure the maximum number of attempts that a user can try to login or promote
the privilege on a console, Telnet, or SSH application. If failed login attempts exceeds this
number, the connection or access will be locked.
Parameters
<int 1-255> - Specify the maximum number of attempts that a user can try to login or promote
the privilege on a console or telnet or SSH application. Default value is 3.
Restrictions Only Administrator level users can issue this command.
Example usage:
To configure the maximum attempts for user's trying to login or promote the privilege to be 9:
DGS-3627:admin# config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
show authen parameter
Purpose This command is used to display the parameters of authentication.
Syntax
show authen parameter
Description Displays the parameters of authentication.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
To display the parameters of authentication:
