A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
430
DGS-3627:admin# enable loopdetect
Command: enable loopdetect
Success.
DGS-3627:admin#
disable loopdetect
Purpose This command is used to disable the LBD function globally on the Switch.
Syntax
disable loopdetect
Description This command is used to disable the LBD function globally on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the LBD function globally:
DGS-3627:admin# disable loopdetect
Command: disable loopdetect
Success.
DGS-3627:admin#
show loopdetect
Purpose This command is used to display the LBD global configuration.
Syntax
show loopdetect
Description This command is used to display the LBD global configuration.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the LBD global settings:
DGS-3627:admin# show loopdetect
Command: show loopdetect
LBD Global Settings
----------------------------------
Status : Enabled
Mode : VLAN-based
Interval : 20 sec
Recover Time : 60 sec
Trap State : None
Log State : Enabled
DGS-3627:admin#