A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
680
92
TECHNICAL SUPPORT COMMANDS
The Technical Support commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
show tech_support
upload tech_support_toTFTP <ipaddr> <path_filename 64>
Each command is listed, in detail, in the following sections.
show tech_support
Purpose Used to show the information of technique’s support.
Syntax
show tech_support
Description This command is especially used by the technical support personnel to dump the device
overall operation information. The information is project dependent and includes the following
information.
Basic System information
system log
Running configuration
Layer 1 information
Layer 2 information
Layer 3 information
Application
OS status
Controller’s status
This command can be interrupted by Ctrl - C or ESC when it is executing.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the information of technique’s support: