xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
217
Example usage:
To display the DHCP server settings:
DGS-3627:admin# show dhcp_server
Command:show dhcp_server
DHCP Server Global State: Disable
Ping Packet Number : 2
Ping Timeout : 500 ms
create dhcp excluded_address begin_address
Purpose Used to configure IP addresses that will be excluded from the DHCP Server pool of
addresses.
Syntax
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
Description This command will allow the user to set an IP address, or a range of IP addresses that are
NOT to be included in the range of IP addresses that the Switch will allot to clients requesting
DHCP service.
Parameters
begin_address <ipaddr> − Enter the beginning IP address of the range of IP addresses to be
excluded from the DHCP pool.
end_address <ipaddr> − Enter the ending IP address of the range of IP addresses to be
excluded from the DHCP pool.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure IP an address that will be excluded from the DHCP server pool of addresses:
DGS-3627:admin# create dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Command: create dhcp excluded_address begin_address 10.10.10.1 end_address 10.10.10.10
Success.
DGS-3627:admin#
