xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
246
DGS-3627:admin# show sim group
Command: show sim group
SIM Group Name : default
ID MAC Address Platform / Hold Firmware Device Name
Capability Time Version
--- ---------------- ------------------ ----- --------- ---------------
*1 00-01-02-03-04-00 DGS-3627 L3 Switch 40 2.80.B31 Tiberius
SIM Group Name : SIM2
ID MAC Address Platform / Hold Firmware Device Name
Capability Time Version
--- ---------------- ----------------- ----- --------- ---------------
*1 00-01-02-03-04-00 DGS-3627 L3 Switch 40 2.80.B31 Neo
‘*’ means commander switch.
Example usage:
To view SIM neighbors:
DGS-3627:admin# show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
reconfig
Purpose Used to connect to a member switch, through the commander switch, using telnet.
Syntax
reconfig {member_id <value 1-32> | exit}
Description This command is used to reconnect to a member switch using Telnet.
Parameters
member_id <value 1-32> – Select the ID number of the member switch the user desires to
configure.
exit – This command is used to exit from managing the member switch and will return to
managing the commander switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
