A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
679
DGS-3627:admin# config system_severity trap information
Command: config system_severity trap information
Success.
DGS-3627:admin#
show system_severity
Purpose This command is used to display the severity level controls for the system.
Syntax
show system_severity
Description This command is used to display the severity level controls for the system.
Parameters None.
Restrictions None.
Example usage:
To show severity level control for system:
DGS-3627:admin# show system_severity
Command: show system_severity
System Severity Trap : warning
System Severity Log : information
DGS-3627:admin#