xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
188
debug config state
Purpose Use the command to set the state of the debug.
Syntax
debug config state [enable | disable]
Description Use the command to set the state of the debug.
Parameters
enable - Enable the debug state.
disable - Disable the debug state.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set the debug state to disabled:
DGS-3627:admin# debug config state disable
Command: debug config state disable
Success.
debug show error_reboot state
Purpose Use the command to show the error reboot status.
Syntax
debug show error_reboot state
Description Show the error reboot status.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the error reboot status.
DGS-3627:admin# debug show error_reboot state
Command: debug show error_reboot state
Error Reboot: Enabled
