xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
159
DGS-3627:admin# disable bpdu_protection
Commands: disable bpdu_protection
Success.
show bpdu_protection
Purpose Used to show bpdu_protection status.
Syntax
show bpdu_protection {ports {<portlist> }}
Description The show bpdu_protection command is used to display bpdu_protection global configuration
or per port configuration and current status.
Parameters
portlist - Specified a range of ports to be configured.
Restrictions None.
Example usage:
To show the bpdu_protection for the entire switch:
DGS-3627:admin# show bpdu_protection
Commands: show bpdu_protection
BPDU Protection Global Settings
---------------------------------------
BPDU Protection status : Enabled
BPDU Protection Recovery Time : 60 seconds
BPDU Protection Trap State : None
BPDU Protection Log State : None
To show the bpdu_protection status ports 1-12:
DGS-3627:admin# show bpdu_protection ports 1-12
Commands: show bpdu_protection ports 1-12
Port State Mode Status
------ ------------ ----------- ----------
1 Enabled shutdown Normal
2 Enabled shutdown Normal
3 Enabled shutdown Normal
4 Enabled shutdown Normal
5 Enabled shutdown Under Attack
6 Enabled shutdown Normal
7 Enabled shutdown Normal
8 Enabled shutdown Normal
9 Enabled shutdown Normal
10 Enabled Block Normal
11 Disabled shutdown Normal
12 Disabled shutdown Normal
