xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
729
debug vrrp vr_state_change
Purpose Used to enable or disable the VRRP debug flag for VR state change.
Syntax
debug vrrp vr_state_change state [enable | disable]
Description This command is used to enable or disable the VRRP debug flag for VR state change.
Parameters
state - The state of the VRRP change debug flags. The default setting is disabled.
enable - Enable the VRRP state change debug flags.
disable - Disable the VRRP state change debug flags.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable the VRRP virtual router state change debug flag:
DGS-3627:admin# debug vrrp vr_state_change state enable
Command: debug vrrp vr_state_change state enable
Success.
debug vrrp packet
Purpose Used to enable or disable VRRP debug flags about packet receiving and sending.
Syntax
debug vrrp packet [all | {receiving | sending}(1)] state [enable | disable]
Description This command is used to enable or disable VRRP debug flags for packet receiving and
sending.
Parameters
all - Set VRRP all packet debug flags.
receiving - Set the VRRP packet receiving flag.
sending - Set the VRRP packet sending flag.
enable - Enable the designated flags.
disable - Disable the designated flags.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable all VRRP packet debug flags:
DGS-3627:admin# debug vrrp packet all state enable
Command: debug vrrp packet all state enable
Success.
debug vrrp mac_addr_update
Purpose Used to enable or disable VRRP debug flags for virtual MAC address operations.
Syntax
debug vrrp mac_addr_update state [enable | disable]
Description This command is used to enable or disable VRRP debug flags for virtual MAC address
operations.
