xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
495
DGS-3627:admin# show ospfv3 neighbor
Command: show ospfv3 neighbor
Router ID of Interface Neighbor Neighbor
Neighbor Name Priority State
--------------- ------------ -------- -------------
10.10.10.10 System 1 Full
20.20.20.20 ip1 10 Full
Total Entries: 2
DGS-3627:admin# show ospfv3 neighbor 10.10.10.10 ipif System
Command: show ospfv3 neighbor 10.10.10.10 ipif System
Neighbor ID: 10.10.10.10 Interface Name: System
Neighbor Options: 19 Neighbor Priority: 255
Neighbor State: Full State Changes: 6 times
Interface ID: 1
Total Entries: 1
show ospfv3 virtual_neighbor
Purpose Used to display OSPFv3 virtual neighbor information.
Syntax
show ospfv3 virtual_neighbor {<area_id> <neighbor_id>}
Description This command is used to display OSPFv3 virtual neighbor information.
Parameters
<area_id> - Specify the transit area where the virtual neighbor is built. If none of the
parameters are set, all virtual neighbors will be displayed.
<neighbor_id> - Specify the ID of the virtual neighbor. If none of the parameters are set, all
virtual neighbors will be displayed.
Restrictions None.
Example usage:
To display OSPFv3 virtual neighbor:
