xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
331
DGS-3627:admin# config igmp all version 2
Command: config igmp all version 2
Success.
show igmp
Purpose This command is used to display the IGMP configurations.
Syntax
show igmp {ipif <ipif_name 12>}
Description The show igmp command displays the IGMP configurations.
Parameters
ipif_name - IP interface name.
If no parameter specified, the system will display all IGMP configurations.
Restrictions None.
Example usage:
To display IGMP configurations for all interfaces:
DGS-3627:admin# show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask Ver- Query Maximum Robust- Last State
sion Response ness Member
Time Value Query
Interval
------------ ------------------ ---- ------ -------- ------- -------- --------
System 10.90.90.90/8 3 125 10 2 1 Disabled
Total Entries: 1
show igmp group
Purpose This command is used to display the switch’s IGMP group table.
Syntax
show igmp group {group <group>} {ipif <ipif_name 12>}
Description The show igmp group command displays the switch’s IGMP group table.
Parameters
group - The multicast group ID.
ipif_name - The name of the IP interface the IGMP group is part of.
If no parameter specified, the system will display all IGMP group tables.
Restrictions None.
Example usage:
To display IGMP group table:
