A SERVICE OF

logo

Open as PDF
next previous
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
178
save config
Purpose Used to save the current configuration to a file.
Syntax
save config {<drive_id>} <pathname 64>
Description Used to save the current configuration to a file. This command is required to be supported
regardless of whether file system is supported or whether multiple configuration files are
supported. The configuration will only save to the master unit.
Parameters
<drive_id> - Specify the drive ID here.
pathname - The pathname specifies the absolute pathname on the device file system.
If pathname is not specified, it refers to the boot up configuration file.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To save the configuration:
DGS-3627:admin#save config 123
Command: save config 123
Saving all configurations to NV-RAM.......... Done.
DGS-3627:admin#