xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
12
show switch
Purpose Used to display general information about the Switch.
Syntax
show switch
Description This command displays information about the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the Switch’s information:
DGS-3627:admin# show switch
Command: show switch
Device Type : DGS-3627 Gigabit Ethernet Switch
MAC Address : 00-1C-F0-B5-40-00
IP Address : 10.24.73.21 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.10-B09
Firmware Version : Build 2.80.B31
Hardware Version : A1
Serial Number : P4F7191000001
System Name :
System Location :
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
RIP : Disabled
DVMRP : Disabled
PIM : Disabled
OSPF : Disabled
TELNET : Enabled (TCP 23)
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show serial_port
Purpose Used to display the current serial port settings.
Syntax
show serial_port
Description This command displays the current serial port settings.
Parameters None.
Restrictions None
Example usage:
To display the serial port setting:
