A SERVICE OF

logo

Open as PDF
next previous
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
660
89
SWITCH PORT COMMANDS
The switch port commands in the Command Line Interface (CLI) are listed (with the appropriate parameters) in the
following table.
Command Parameters
config ports [<portlist> | all ] {medium_type [fiber | copper]} { speed[auto
{capability_advertised {10_half | 10_full | 100_half | 100_full | 1000_full } }|
10_half | 10_full | 100_half | 100_full | 1000_full {[master | slave]} ] |
auto_negotiation restart_an |flow_control [enable | disable] | learning [enable |
disable ] | state [enable | disable] | [description <desc 1-32> | clear_description]}
show ports {<portlist>} {[description | err_disabled | auto_negotiation | details | media_type]}
Each command is listed, in detail, in the following sections.