xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
91
clear arptable
Purpose Used to clear all the dynamic ARP entries from the ARP table.
Syntax
clear arptable
Description This command is used to clear all the dynamic entries from ARP table.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear the ARP table:
DGS-3627:admin# clear arptable
Command: clear arptable
Success.
show arpentry
Purpose Used to display the ARP table.
Syntax
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr> }
Description This command is used to displays the ARP table. You can filter the display by IP address,
interface name, static entries, or MAC address.
Parameters
ipif_name - The name of the IP interface the end node or station for which the ARP table
entry was made, resides on.
ipaddr - The IP address of the end node or station.
static - Display the static entries in the ARP table.
macaddr - Displays the ARP entry by MAC address.
Restrictions Only Administrator, Operator, and User level users can issue this command.
Example usage:
To display the ARP table:
