xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
414
enable lldp
Purpose Used to enable LLDP operation on the Switch.
Syntax
enable lldp
Description This is a global control for the LLDP function. When this function is enabled, the switch can
start to transmit LLDP packets and receive and process the LLDP packets. The specific
function of each port will depend on the per port LLDP setting. For the advertisement of
LLDP packets, the switch announces the information to its neighbor through ports. For the
receiving of LLDP packets, the switch will learn the information from the LLDP packets
advertised from the neighbor in the Neighbor’s table. The default state for LLDP is disabled.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable LLDP:
DGS-3627:admin# enable lldp
Command: enable lldp
Success.
disable lldp
Purpose Used to disable LLDP operation on the Switch.
Syntax
disable lldp
Description This command will stop the sending and receiving of LLDP advertisement packets on the
Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable LLDP:
DGS-3627:admin# disable lldp
Command: disable lldp
Success.
