xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
250
DGS-3627:admin# download sim_ms firmware_from_tftp 10.53.13.94 c:/dgs3627.had all
Command: download sim_ms firmware_from_tftp 10.53.13.94 c:/dgs3627.had all
This device is updating firmware. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- -------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
To download configuration files:
DGS-3627:admin# download sim_ms configuration_from_tftp 10.53.13.94 c:/dgs3627.txt all
Command: download sim_ms configuration_from_tftp 10.53.13.94 c:/dgs3627.txt all
This device is updating configuration. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
upload sim_ms
Purpose User to upload a configuration file to a TFTP server from a specified member of a SIM group.
Syntax
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename>
{[members <mslist> | all]}
Description This command will upload a configuration file to a TFTP server from a specified member of a
SIM group.
Parameters
configuration_to_tftp – Specify this parameter if the user wishes to upload a switch
configuration to members of a SIM group.
log_to_tftp – Specify this parameter to download a switch log to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server to upload a configuration file to.
<path_filename> – Enter a user-defined path and file name on the TFTP server to which to
upload configuration files.
members – Enter this parameter to specify the members the user prefers to upload switch
configuration or log files to. The user may specify a member or members by adding one of
the following:
• <mslist> – Enter a value, or values to specify which members of the SIM group will
receive the switch configuration or log files.
• all – Add this parameter to specify all members of the SIM group will receive the
switch configuration or log files.
Restrictions Only Administrator and Operator-level users can issue this command.
