xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
746
DGS-3627:admin# config wac user Jim vlan 3
Command: config wac user Jim vlan 3
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
config wac authorization attributes
Purpose The enable authorization command will enable acceptation of authorized configuration.
Syntax
config wac authorization attributes {radius [enable| disable] | local [enable |
disable]}(1)
Description Used to enable or disable acceptation of authorized configuration.
When the authorization is enabled for WAC’s radius, the authorized data assigned by the
RADUIS server will be accepted if the global authorization network is enabled.
When the authorization is enabled for WAC’s local, the authorized data assigned by the local
database will be accepted.
Parameters
radius - If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled. The default state is enabled.
local - If specified to enable, the authorized data assigned by the local database will be
accepted if the global authorization network is enabled. The default state is enabled.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
The enable authorization command will enable acceptation of authorized configuration:
DGS-3627:admin# config wac authorization attributes local disable
Command: config wac authorization attributes local disable
Success.
show wac
Purpose Used to display web authentication global setting.
Syntax
show wac
Description This command allows the user to display the WAC global setting.
Parameters None.
Restrictions None.
Example usage:
Show global configuration about WAC:
