xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
8
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (with the appropriate parameters) in the
following table.
Command Parameters
create account [admin | operator | user] <username 15>
config account
<username> {encrypt [plain_text| sha_1] <password>}
show account
delete account <username> {<string>}
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet {<tcp_port_number 1-65535>}
disable telnet
telnet [<ipaddr> | <domain_name 255>] {tcp_port <value 0-65535>}
enable web {<tcp_port_number 1-65535>}
disable web
save
{[config {<drive_id>} <pathname 64> | log | all]}
reboot {<string>}
reset {[config |system]} {<string>}
login
logout
show device_status
config command_prompt [<string 16> | username | default]
config greeting_message {default}
show greeting_message
Each command is listed, in detail, in the following sections.
