A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
557
DGS-3627:admin# show pim rpset
Command: show pim rpset
PIM RP-Set Table
Bootstrap Router: 12.43.51.81
Group Address RP Address Holdtime Expired Time Type
---------------- --------------- ------------ -------------- -----------
224.0.0.0/4 31.43.51.81 150 107 Dynamic
Total Entries: 1
DGS-3627:admin#
show pim crp
Purpose Used to display the Candidate RP settings on the Switch, along with CRP
parameters configured for the Switch.
Syntax
show pim crp
Description This command will display the settings for Candidate RPs that are accessible to the
switch. This command is for PIM-SM configurations only.
Parameters None.
Restrictions None.
Example usage:
To view the CRP settings:
DGS-3627:admin# show pim crp
Command: show pim crp
PIM Candidate-RP Table
C-RP Holdtime : 150
C-RP Priority : 2
C-RP Wildcard Prefix Count : 0
Group Interface
--------------------- ---------------------
224.0.0.0/4 Zira
Total Entries: 1
DGS-3627:admin#