xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
426
DGS-3627:admin# show lldp local_ports 1
Command: show lldp local_ports 1
Port ID : 1:1
----------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description :
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show lldp remote_ports
Purpose Used to display the information learned from the neighbor.
Syntax
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Description This command display the information learned from the neighbor parameters. Due to a
memory limitation, only 32 VLAN Name entries and 10 Management Address entries can be
received.
Parameters
<portlist> – Use this parameter to define ports to be configured.
mode – Choose from three options:
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
Restrictions None.
Example usage:
To display remote table in brief mode:
DGS-3627:admin# show lldp remote_ports 1-2 mode brief
Command: show lldp remote_ports 1-2 mode brief
Port ID: 1:1
----------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-0-2-03-04-01
Port ID Subtype : Local
Port ID : 1/3
Port Description : RMON Port 1 on Unit 3
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
