xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
359
DGS-3627:admin# show address_binding dhcp_snoop
Command: show address_binding dhcp_snoop
DHCP Snoop(IPv4) : Enabled
DHCP Snoop(IPv6) : Enabled
To display DHCP snooping maximun entry configuration:
DGS-3627:admin# show address_binding dhcp_snoop max_entry
Command: show address_binding dhcp_snoop max_entry
Port Max Entry
------- -------
1 10
2 10
3 10
4 No Limit
5 No Limit
6 No Limit
7 No Limit
8 No Limit
9 No Limit
10 No Limit
11 No Limit
12 No Limit
To display the DHCP snooping binding entries:
DGS-3627:admin# show address_binding dhcp_snoop binding_entry
Command: show address_binding dhcp_snoop binding_entry
LT(Lease Time) ST(Status) - A:Active I:Inactive
IP Address MAC Address LT(secs) Port ST
------------------------------------------- --------------------- --------- ------- --
10.62.58.35 00-0B-5D-05-34-0B 35964 1 A
10.33.53.82 00-20-c3-56-b2-ef 2590 2 I
2001:2222:1111:7777:5555:6666:7777:8888 00-00-00-00-00-02 50 5 I
2001::1 00-00-00-00-03-02 100 6 A
Total Entries: 4
config address_binding dhcp_snoop max_entry
Purpose Used to specify the maximum number of entries that can be learned by a specified port.
Syntax
config address_binding dhcp_snoop max_entry ports [<portlist> | all] limit [<value 1-
50> | no_limit]
Description By default, the maximum number of port entries is unlimited.
This command specifies the maximum number of entries that can be learned by the specified
ports.
Parameters
portlist - Specify the list of ports you would like to set the maximum number of entries that
