xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
26
show ipif
Purpose This command is used to display the interface’s information.
Syntax
show ipif {<ipif_name 12>}
Description To show an interface’s information. Configuration for both IPv4 and IPv6’ addresses will be
displayed.
Parameters
ipif_name - Specifies the name of the IP interface used.
Restrictions None.
Example usage:
Show interface’s information:
DGS-3627:admin# show ipif
Command: show ipif
IP Interface : n6
VLAN Name : 6
Interface Admin State : Enabled
DHCPv6 Client State : Disabled
IPv4 Address : 192.168.6.105/24 (Manual) Primary
Proxy ARP : Disabled (Local : Disabled)
IP Directed Broadcast : Disabled
IPv6 Link-Local Address : FE80::202:3FF:FE03:202/128
IPv6 Global Unicast Address : 3006::105/64 (Manual)
IP MTU : 1500
show ipif_ipv6_link_local_auto
Purpose Display the link local address automatic configuration state.
Syntax
show ipif_ipv6_link_local_auto {<ipif_name 12>}
Description Display the link local address automatic configuration state.
Parameters
ipif_name - Specifies the name of the IP interface used.
Restrictions None.
Example usage:
Show interface’s information:
DGS-3627:admin# show ipif_ipv6_link_local_auto
Command: show ipif_ipv6_link_local_auto
IPIF : System Automatic Link Local Address: Enabled.
IPIF : FirstFloor Automatic Link Local Address: Disabled.
delete ipif
Purpose Delete an interface.
