xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
730
debug vrrp mac_addr_update
Parameters
state - The state of VRRP MAC debug flags. The default setting is disabled.
enable - Enable VRRP MAC debug flags.
disable - Disable VRRP MAC debug flags.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable VRRP virtual MAC address update debug flags:
DGS-3627:admin# debug vrrp mac_addr_update state enable
Command: debug vrrp mac_addr_update state enable
Success.
debug vrrp interface_change
Purpose Used to enable or disable debug flags for VRRP interface state changes.
Syntax
debug vrrp interface_change state [enable | disable]
Description The command is used to enable or disable debug flags for VRRP interface state changes.
Parameters
state - The state of VRRP interface debug flags. The default setting is disabled.
enable - Enable VRRP interface debug flags.
disable - Disable VRRP interface debug flags.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable VRRP interface state change debug flags:
DGS-3627:admin# debug vrrp interface_change state enable
Command: debug vrrp interface_change state enable
Success.
debug vrrp timers
Purpose Used to enable or disable debug flags for VRRP timers.
Syntax
debug vrrp timers state [enable | disable]
Description This command is used to enable or disable debug flags for VRRP timers.
Parameters
state - The state of VRRP timers debug flags. The default setting is disabled.
enable - Enable VRRP timers debug flags.
disable - Disable VRRP timers debug flags.
Restrictions Only Administrator level users can issue this command.
Example usage:
