Kawasaki STX-15F Jet Ski User Manual


 
1-2 GENERAL INFORMATION
Smart Learning Operation mode (SLO) (JT1500-A2 model )
This watercraft is equipped with the Smart Learning Operation mode (SLO) and normal operation
mode (Full Power Operation, FPO). The SLO mode reduces the maximum watercraft speed by ap-
proximately 30 percent for a use by unskilled operators. To change the SLO mode to FPO mode, and
back again, push the “MODE” button for 7 s econds or more.
SLO mode is displayed on the meter as SLO.
NOTE
When shifted to the SLO mode, the initial display, as
shown when the ignition switch is turned on, is shown
together with a buzzer sound.
Then, “SLO” is shown blinking at every three seconds.
Under the SLO mode, all the meter displays and other
functions work in the same manner as the normal oper-
ation (Full Power Operation, FPO) mode.
Normal operation mode (Full Power Operation mode, FPO)
is shown by FPO display.
NOTE
When shifted to the normal operation mode (Full Power
Operation mode, FPO), the same initial display is first
shown and followed by “FPO” for two seconds. How-
ever, “FPO” is shown only once when shifted and is not
displayed thereafter.
When the ignition switch is turned off and on again, the
same mode when turned off is displayed again.