Filter
Top Products
ENGINE REMOVAL/INSTALLATION 7-5
Engine Removal/Installation
•
Remove:
Engine Mounting Bolts [A]
•
Slide the engine toward the front to disengage the cou-
pling [A].
•
Using the lifter [A], raise the front side of the engine a little
and lift the engine [B] out off the hull [C].
Engine Damper Removal
•
Remove:
Engine Damper Mounting Bolts [A]
Engine Damper [B]
Shim [C] (0 ∼ 2pieces)
Bow [D]
•
Record the number of shims of four positions so they can
be put back in the same position.
CAUTION
Install the shims to the same position. Incorrect
shims could cause drive shaft misalignment.