Filter
Top Products
14-40 ELECTRICAL SYSTEM
Ignition System
•
Pull out the spark plug lead [B] from the ignition coil [A].
Lubricate the leads with penetrating rust inhibitor.
Ignition Coil Installation
•
Connect the spark plug lead to each ignition coil as fol-
lows.
#1 Spark Plug Lead Length 340 mm (13.4 in.) [A]
#2 Spark Plug Lead Length 450 mm (17.7 in.) [B]
#3 Spark Plug Lead Length 540 mm (21.3 in.) [C]
#4 Spark Plug Lead Length 600 mm (23.6 in.) [D]
○
Marked [E] is a number of each lead
•
Apply a non-permanent locking agent to the ignition coil
mounting bolts.
•
Install the #1, 4 ignition coil [F] and #2, 3 ignition coil [G]
to the bracket [H].
Torque - Ignition Coil Mounting Bolts: 7.8 N·m (0.80 kgf·m,
69 in·lb)
○
Apply a non-permanent locking agent to the bracket bolts.
•
Install the removal parts.
○
For JT1500-A2 model ∼; Replace the double spring
clamps with new ones. (see Fuel System (DFI) chapter)