Filter
Top Products
12-12 S TEERING
Steering
•
Remove the front storage pocket (see Hull/Engine Hood
chapter).
•
Disconnect:
Steering Position Sensor Lead Connector [A]
Buzzer Connector [B]
Multifunction Meter Lead Connectors [C]
Steering Cable Ball Joint at Upper End
Shift Cable Ball Joint at Upper End
•
Take out the grommet mounting plate [A] and pull the
grommet [B].
•
Pull out the multifunction meter leads [A] and buzzer lead
[B] from the grommet.
•
Remove the steering cover [C].
•
Unscrew the steering neck mounting bolts [A] and remove
the steering neck [B].