Filter
Top Products
13-14 H ULL/ENGINE HOOD
Fittings
Stabilizer Removal
•
Unscrew the stabilizer bolts [A] and remove the stabilizer
[B].
Stabilizer Installation
•
Install the stabilizer as shown.
Stabilizer [A]
Chine Line [B]
111 ±3 mm (4.37 ±0.12 in.) [C]
8±2mm(0.31±0.08in.) [D]
•
Apply a non-permanent locking agent to the stabilizer bolt
and torque them.
Torque - Stabilizer Bolts: 9.8 N·m (1.0 k gf·m, 87 in·lb)
Reboarding Step Removal
•
Unscrew the reboarding step bolts [A] and remove the
reboarding step [B].
Reboarding Step Installation
•
Apply a non-permanent locking agent to the reboarding
step bolts and tighten them securely.