Filter
Top Products
11-10 P UMP AND IMPELLER
Pump and Impeller
•
Unscrew the pump cap bolts [A], and remove the pump
cap [B].
•
Pull out the impeller seal on the impeller.
•
Hold the shaft in the impeller holder, taking care not to
damage it. Remove the impeller from the pump shaft and
then pull out the pump shaft.
Special Tools - Impeller Holder: 57001-1393 [A]
Impeller Wrench: 57001-1228 [B]
JT1500-A1;
•
Pull out the bushing [A].
•
Remove the circlip.
•
Remove the grease seals.
Special Tool - Oil Seal & Bearing Remover: 57001-1058 [A]