Filter
Top Products
FUEL SYSTEM (DFI) 3-5
Exploded View
Torque
No. Fastener
N·m kgf·m ft·lb
Remarks
1 Vehicle-down Sensor Mounting Screws 1.5 0.15 13 in·lb
2 Bracket M ounting Bolts – – – L
3 Inlet Manifold Mounting Bolts 25 2.5 18 L
4 Inlet Manifold Mounting Nuts 20 2.0 14
5 Delivery Pipe Mounting Bolts 7.8 0.80 69 in·lb
6 Inlet Air Pressure Sensor Bolts 7.8 0.80 69 in·lb
7 Throttle Cable Holder Bolts 8.8 0.90 78 in·lb L
8 Inlet Air Temperature Sensor 20 2.0 14
9 Throttle Body Assy Mounting Bolts 20 2.0 14
10 Inlet Manifold Drain Plug 20 2.0 14
11 Inlet Manifold Plate Bolts 7.8 0.80 69 in·lb
12
Crankshaft Sensor Screws
4.4 0.45 39 in·lb L
13 Camshaft Position Sensor Bolt 7.8 0.80 69 in·lb L
14 Water Temperature Sensor 15 1.5 11 see text
15 Oil Temperature Sensor 15 1.5 11 see text
16 Regulator/rectifier Bolts 7.8 0.80 69 in·lb
17 ECU Mounting Bolts 8.8 0.90 78 in·lb L
18
Throttle Sensor Mounting Screws
2.0 0.20 18 in·lb
19 ISC Actuator Mounting Bolts 4.9 0.50 43 in·lb
20. Ignition Coils
21. Fuel Injectors
22. Main Fuse 20 A
23. Relay Assembly (Main Relay/Fuel Pump Relay)
A: JT1500-A1 Model (Clamps)
B: JT1500-A2 Model ∼(Double Spring Clamps)
EO: Fill the hollow with the engine oil (10W-30).
G: Apply grease.
L: Apply a non-permanent locking agent.
R: Replacement Parts
Si: Fill the hollow with the specified silicone grease (Kawasaki Bond: 92137-1002).
SO: Apply silicone oil to the O-ring.