12-8 STEERING
Handlebar
Handlebar Removal
•
Unscrew the mounting screws [A] and remove the han-
dlebar pad [B].
•
Remove the inner pad [A], pushing [B] the buzzer [C].
•
Unscrew the bolts [A] and remove the pad holder [B].
•
Take out the throttle case clamp screws and remove the
throttle case [A].
•
Take out the switch case c lamp screws and remove the
switch case [B].
•
Unhook the pipe [C].
•
Cut off the clamp [D].
•
Unscrew the handlebar clamp bolts [A] and remove the
handlebar clamps [B] and handlebar [C].