Filter
Top Products
2-20 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
•
Obtain a standard garden hose [A] and a garden hose
adapter [B] as shown.
Garden Hose Fitting of Adapter [C]
Flushing Fitting of Adapter [D]
Thread: Rp 3/4 [E]
NOTE
○
Optional part (P/No. 92005-3746) is available as a gar-
den hose adapter.
•
Open the front storage compartment cover.
•
Remove the flushing cap [A] on the brim of the storage
compartment.
•
Screw a garden hose adapter [A] onto the flushing fitting
[B].
•
Attach a garden hose [C] to a garden hose adapter and
secure the hose clamp [D].
•
Start the engine and allow it to idle before turning on the
water.
CAUTION
The engine must be running before the water is
turned on or water may flow back through the
exhaust pipe into the engine, resulting in the pos-
sibility of severe internal damage.
•
Immediately turn on the water and adjust the flow so that
a little trickle of water comes out of the bypass outlet [A]
on the right side of the hull.