PERIODIC MAINTENANCE 2-3
Torque and Locking Agent
The following table list the tightening torque for the major fasteners, and the parts requiring use of
a non-permanent locking agent or silicone sealant.
Letters used in the “Remarks” column mean:
EO: Apply oil to the threads and seating surface.
L: Apply a non-permanent locking agent to the threads.
MO: Apply molybdenum disulfide grease oil solution.
R: Replacement Part
S: Tighten the fasteners following the specified sequence.
SS: Apply silicone sealant to the threads.
Torque
Fastener
N·m kgf·m ft·lb
Remarks
Fuel System
Vehicle-down Sensor Mounting Screws 1.5 0.15 13 in·lb
Bracket Mounting Bolts – – – L
Inlet Manifold Mounting Bolts 25 2.5 18 L
Inlet Manifold Mounting Nuts 20 2.0 14
Delivery Pipe Mounting Bolts 7.8 0.80 69 in·lb
Inlet Air Pressure Sensor Bolts 7.8 0.80 69 in·lb
Throttle Cable Holder Bolts 8.8 0.90 78 in·lb L
Inlet Air Temperature Sensor 20 2.0 14
Throttle Body Assy Mounting Bolts 20 2.0 14
Inlet Manifold Drain Plug
20 2.0 14
Inlet Manifold Plate B olts 7.8 0.80 69 in·lb
Crankshaft Sensor Screws 4.4 0.45 39 in·lb L
Camshaft Position Sensor Bolt 7.8 0.80 69 in·lb L
Oil Temperature S ensor 15 1.5 11 see text
Water Temperature Sensor 15 1.5 11 see text
Regulator/Rectifier Bolts 7.8 0.80 69 in·lb
ECU Mounting Bolts 8.8 0.90 78 in·lb L
Throttle Sensor Mounting Screws 2.0 0.20 18 in·lb
ISC Actuator Mounting Bolts 4.9 0.50 43 in·lb
Oil Pressure Switch
15 1.5 11
SS
Fuel Filler Tube Clamp Screws
2.9 0.30 26 in·lb
Fuel Level Sensor Clamp Screw
2.9 0.30 26 in·lb
Fuel Filter Mounting Bolts 8.8 0.90 78 in·lb L
Air Filter Mounting Bolts 9.8 1.0 87 in·lb
Air Filter Bracket Mounting Bolts 7.8 0.80 69 in·lb L
Throttle Cable Locknut
7.8 0.80 69 in·lb
Throttle Case Mounting Screws
3.9 0.40 35 in·lb
Engine Lubrication System
Breather Plate Bolts 7.8 0.80 69 in·lb
Oil Filler Cap 1.0 0.10 8.7 in·lb
Oil Passage Plugs 20 2.0 14 L
Oil Separator Tank Mounting Screws
4.9 0.50 43 in·lb L
Breather Case Mounting Bolts
7.8 0.80 69 in·lb
Breather Pipe Bolts 8.8 0.90 78 in·lb