Filter
Top Products
ENGINE TOP END 6-11
Clean Air System
Air Suction Valve Removal
•
Remove:
Seat (see Hull/Engine Hood chapter)
Hoses [A]
•
Remove:
Air Suction Valve Cover Bolts [A]
Air Suction Valve Covers [B]
Air Suction Valve Assembly [C]
Air Suction Valve I nstallation
•
Install the valve assembly [A] so that its reeds [B] side
faces inside and it’s opening [C] side faces inlet s ide.
•
Install the air suction valve covers.
Torque - Air Suction Valve Cover Bolts: 9.8 N·m (1.0 kgf·m,
87 in·lb)
Air Suction Valve Check
•
Refer to Air Suction Valve in the Periodic Maintenance
chapter.
Clean Air System Hose Inspection
•
Be certain that all the hoses are routed without being flat-
tened or kinked, and are connected correctly to the air
filter housing, throttle body and air s uction valve covers.
If they are not, correct them. Replace them if they are
damaged.