Filter
Top Products
3-70 FUEL SYSTEM (DFI)
Air Filter
Air Filter Removal
•
Remove the seat (see Hull/Engine Hood chapter).
•
Remove the rear storage pocket.
•
Disconnect the following from the air filter [A].
Air Suction Valve Hose [B]
Oil Separator Tank Hose [C]
•
Remove the oil separator tank [D] (see Engine Lubrication
System chapter).
•
Loosen the clamp [A] on the inlet air duct [B].
•
Remove the air filter mounting bolts [C].
•
Remove the air filter [A] out of the engine compartment.
Air Filter Installation
•
Tighten:
Torque - Air Filter Mounting Bolts: 9.8 N·m (1.0 kgf·m, 87
in·lb)