Filter
Top Products
ELECTRICAL SYSTEM 14-67
Fuse
Inspection
•
Remove:
Seat
Fuse Case [A]
•
Take out the fuse [A].
•
Inspect the fuse element.
If it blown out, replace the fuse. Before r eplacing a blown
fuse, always check the amperage in the affected circuit.
If the amperage is equal to or greater than the fuse rat-
ing, check the wiring and related components for a short
circuit.
Housing [A]
Fuse Element [B]
Terminals [C]
Blown Element [D]
CAUTION
When replacing a fuse, be sure the new fuse
matches the specified fuse rating for that circuit.
Installation of a fuse with a higher rating may cause
damage to wiring and components.