Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
118
AUDIO PANEL AND CNS
Figure 4-30 Transponder Softkeys (PFD)
Pressing the BACK Softkey
returns to the top-level softkeys.
ALERTS
ALERTS
BACK BKSP
IDENT
7 6 5 4 3 2 1 0
STBY ON
ALT VFR
CODE
IDENT BACK
XPDR
IDENT
Pressing the BACK Softkey returns to the mode selection softkeys.
GND
TRANSPONDER MODE SELECTION
Modeselectioncanbeautomatic(GroundandAltitudeModes)ormanual(Standby,ON,andAltitudeModes).
The
STBY
,
ON,
and
ALT
Softkeys can be accessed by pressing the
XPDR
Softkey.
Selecting a transponder mode:
1) Press the
XPDR
Softkey to display the Transponder Mode Selection Softkeys.
2) Press the desired softkey to activate the transponder mode.
GROUND MODE
GroundMode isnormally selectedautomatically whenthe aircraftis onthe ground. The transponder
powersupinthelastmodeitwasinwhenshutdown.GroundModecanbeoverriddenbypressinganyone
oftheModeSelectionSoftkeys.AgreenGNDindicationandtranspondercodeappearinthemodeeldof
theTransponderDataBox.InGroundMode,thetransponderdoesnotallowModeAandModeCreplies,
but it does permit acquisition squitter and replies to discretely addressed Mode S interrogations.
WhenStandbyModehasbeenselectedontheground,thetranspondercanbereturnedtoGroundMode
by pressing the GND Softkey.
GND
Mode
Figure 4-31 Ground Mode
 previous next