Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
38
SYSTEM OVERVIEW
Figure 1-29 Pilot Profiles (System Setup Page)
Creating a profile:
1) Turn the large FMS Knob to select the AUX Page group.
2) Turn the small FMS Knob to select System Setup.
3) Press the FMS Knob momentarily to activate the flashing cursor.
4) Turn the large FMS Knob to highlight ‘CREATE’ in the Pilot Profile Box.
5) Press the ENT Key. A ‘Create Profile’ window is displayed.
6) Use the FMS Knob to enter a profile name up to 16 characters long and press the ENT Key. Pilot profile names
cannot begin with a blank as the first letter.
7) In the next field, use the small FMS Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
8) Press the ENT Key.
9) With ‘CREATE’ highlighted, press the ENT Key to create the profile
Or:
Use the large FMS Knob to select ‘CREATE and ACTIVATE’ and press the ENT Key to activate the new profile.
10) To cancel the process, select ‘CANCEL’ with the large FMS Knob and press the ENT Key.
Selecting an active profile:
1) While on the System Setup 1 or Setup 2 Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the active profile field in the Pilot Profile Box.
3) Turn the small FMS Knob to display the pilot profile list and highlight the desired profile.
4) Press the ENT Key. The G1000 loads and displays the system settings for the selected profile.