Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
40
SYSTEM OVERVIEW
Enabling HTAWS voice callouts:
1) Turn the large FMS Knob to select the AUX Page group.
2) Turn the small FMS Knob to select System Setup.
3) If necessary, press the SETUP 2 Softkey to select the System Setup 2 Page.
4) Press the FMS Knob momentarily to activate the flashing cursor.
5) Turn the large FMS Knob to highlight the Max Selected field.
6) Turn the small FMS Knob one click to the left to enable the first callout value. Each subsequent click to the left
enables the next callout.
SYSTEM STATUS PAGE
The System Status Page displays the status and software version numbers for all detected system LRUs.
Pertinent information on all system databases is also displayed. Active LRUs are indicated by green check
marks and failed LRUs are indicated by red “X”s. Failed LRUs should be noted and a Bell service center or
Garmin dealer informed.
Figure 1-30 Example System Status Page
Display Database
Selection Softkey
The LRU and ARFRM softkeys on the System Status Page select the applicable list (LRU INFO or AIRFRAME
window) through which the FMS Knob can be used to scroll information within the selected window.
Pressing the Display Database Selection Softkey (background changes to grey indicting the softkey is selected)
places the cursor in the DATABASE window. Use the FMS Knob to scroll through database information for
the database information. Each press of the Display Database Selection Softkey will change the softkey label
(PFD1 DB, etc) to indicate the display for which database information is displayed.
The ANN TEST Softkey, when pressed, causes an annunciation test tone to be played, the RMP and master
warning/ caution PBAs to illuminate, and the instrument fan to activate.