Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev B58
FLIGHT INSTRUMENTS
Navigationangles(track,heading,course,bearing)aresetontheAUX-SystemSetupPageandareeither
correctedtothecomputedmagneticvariation(‘MagVar’),referencedtotruenorth(denoted‘T’),orcorrected
accordingtouserinput(denoted‘U’).Whenanapproachreferencedtotruenorthhasbeenloadedintothe
flight plan, the system generates a message to change the navigation angle setting to ‘True’ at the appropriate
time.
Figure 2-18 Heading and Course Indications (True)
Figure 2-19 Heading and Course Indications (User)
Changing the navigation angle setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the
large FMS
Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box.
4) Turn the small FMS Knob to highlight the desired setting and press the ENT Key.
•TRUE - References angles to true north (denoted with ‘T’)
•MAGNETIC - Angles corrected to the computed magnetic variation (‘Mag Var’)
•USER - Angle set according to user input
Figure 2-20 Navigation Angle Settings
(AUX - System Setup Page)
 previous next