Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B368
HAZARD AVOIDANCE
ADDITIONAL TRAFFIC DISPLAYS
TrafcinformationcanbedisplayedonthefollowingmapsontheMFDwhentheunitisoperating:
•NavigationMapPage
•TrafcMapPage
•TripPlanningPage
•NearestPages
•ActiveFlightPlanPage
•SystemPages
TrafcinformationcanalsobedisplayedonthePFDwhenSyntheticVisionSystem(SVS)enabled.Seethe
AdditionalFeaturesSectionfordetails.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
WhentrafcisselectedonmapsotherthantheTrafcMapPage,atrafciconisshowntoindicatetrafc
isenabledfordisplay(Figure6-98).
Displaying traffic on the Navigation Map
1) Ensure the TAS system is operating. With the Navigation Map displayed, select the
MAP
Softkey.
2) Select the
TRAFFIC
Softkey. Traffic is now displayed on the map as shown in the figure.
Non-Threat
Traffic
Traffic
Advisory
TA Off Scale Banner
Annunciation
“No Bearing”
Traffic Advisory
Banner Annunciation
Non-Threat
Traffic with
ADS-B
Directional
Information
Proximity
Traffic with
ADS-B Directional
Information
Figure 6-98 TAS Traffic on Navigation Map
Traffic Status
Icon
 previous next