Filter
Top Products
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B324
HAZARD AVOIDANCE
•DESTINATION – Requests data based on the active flight plan destination (Direct-To destinations excluded).
See the Flight Management section for more information about entering and activating flight plans.
•FPL – Requests data along an active flight plan, if one exists. Turn the small FMS Knob to select the desired
flight plan look-ahead distance option (or choose ‘REMAINING FPL’ to request the remainder of the flight
plan), then press the ENT Key.
•WAYPOINT – Requests data based on a waypoint (which may be off-route). Turn the large and small FMS
Knobs to enter a waypoint, then press the ENT Key.
5) Turn the large FMS Knob highlight to the ‘DIAMETER / RTE WIDTH’ (diameter/route width) distance field and
turn the small FMS Knob to select the desired diameter and route width of the request, then press the
ENT
Key.
6) Turn the large FMS Knob until the ‘SEND REQ’ button is highlighted. Press the
ENT
Key to initiate the request
immediately or press the FMS Knob to return to the Weather Data Link (GFDS) Page without requesting weather
data.
Figure 6-53 Weather Data Link (GFDS) Page Menu
Figure 6-54 GFDS Data Request Window