Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B472
ADDITIONAL FEATURES
8.8 SCHEDULER
The Schedulerfeaturecanbeusedtoenteranddisplayremindermessages(e.g.,Phase1Inspection,Switchfuel
tanks,orAltimeter-TransponderCheck)intheAlertsWindowonthePFD.Messagescanbesettodisplaybased
onaspecicdateandtime(event),oncethemessagetimerreacheszero(one-time;defaultsetting),orrecurrently
wheneverthemessagetimerreacheszero(periodic).Messagetimerssettoperiodicalertingautomaticallyreset
totheoriginaltimervalueoncethemessageisdisplayed.Whenpoweriscycled,allmessagesareretaineduntil
deleted,andmessagetimercountdownisresumed.
Figure 8-113 Scheduler (Utility Page)
Entering a scheduler message:
1) Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the first empty scheduler message naming field.
4) Use the FMS Knob to enter the message text to be displayed in the Alertss Window and press the
ENT
Key.
5) Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to Type.
6) Turn the small FMS Knob to select the message type:
• Event—Message issued at the specied date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.
8) For periodic and one-time message, use the FMS Knob to enter the timer value (HH:MM:SS) from which to
countdown and press the ENT Key.
 previous next