Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B348
HAZARD AVOIDANCE
ALTITUDE VOICE CALLOUT (VCO) AURAL ALERTS
HTAWSprovidesauralaltitudeadvisoryalertsastheaircraftdescends.VCOalertsarebasedoneitherradar
altitude(ifaradaraltimeterisinstalledandavailable)ortheGPS-computedheightaboveterrain.
AVCOalertconsistsofaauralmessagesuchas“five hundred”.
VCOalertscanbeconguredtooccurataltitudesof500’,400’,300’,200’,150’and50’;alertsmayalsobe
disabledentirely.Therearenodisplayannunciationsorpop-upalertsthataccompanytheauralVCOalert(s).
Configuring VCO alerting altitudes:
1) Turn the large FMS knob to select the AUX - System Setup Page.
2) If the Aux - System Setup 2 Page is not already displayed, press the SETUP 2 Softkey.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight the altitude shown in the MAX SELECTED field.
5) Turn the small FMS Knob to select the maximum altitude at which VCO alerts will be enabled from (from 500
to 50 feet), or select NONE to disable all VCO alerts.
6) When finished, press the FMS Knob.
TheG1000HrememberstheVCOalertaltitudecongurationthroughpowercycles.
Figure 6-82 Voice Callout Settings
(AUX - System Setup 2 Page)
 previous next