Garmin G1000H Marine Radio User Manual


 
190-01255-00 Rev. B
Garmin G1000H
Pilot’s Guide for the Bell 407GX
6
SYSTEM OVERVIEW
1.3 G1000H CONTROLS
NOTE: The Audio Panel (GMA 350) are described in the CNS & Audio Panel.
The G1000H system controls are located on the PFD and MFD bezels and audio panel. The controls for the
PFD and MFD are discussed within the following pages of this section.
PFD CONTROLS
Figure 1-2 PFD/MFD Controls
1718
5
6
8
7
2
4
31 9
15
14
13
12
16
11
10
The following list provides an overview of the controls located on the PFD bezel (see Figure 1-2).
1
NAV VOL/ID Knob
Turn to control NAV audio volume (shown in the NAV Frequency Box as a percentage)
Press to toggle Morse code identifier audio ON/OFF
2
NAV Frequency
Transfer Key
Transfers the standby and active NAV frequencies
3
NAV Knob
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between NAV1 and NAV2
4
Heading Knob
Turn to manually select a heading
Press to display a digital heading momentarily to the left of the HSI and synchronize
the Selected Heading to the and current heading