Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
33
SYSTEM OVERVIEW
DisPlay Units
Units in which various quantities are displayed on the G1000H screens are listed on the System Setup 1
Page. The Navigation Angle reference and the Position units are pilot selectable.
Category Settings Affected Quantities Exceptions
Navigation Angle Magnetic (North)*
True (North)
User
Heading
Course
Bearing
Track
Desired Track
Wind direction (Trip Planning Page)
N/A
Distance and Speed Nautical*
Metric
Crosstrack error (HSI)
Bearing distances (information windows)
DME distance (information window)
Flight plan distances
Map ranges
DIS, GS, TAS, XTK fields (Navigation Status Box)
All distances on MFD
Altitude buffer distance (System Setup)
Arrival Alert trigger distance (System Setup)
All speeds on MFD
Airspeed Indicator
True Airspeed (PFD)
Wind speed vector
Map range (Traffic Page, TAWS
Page)
CDI scaling (System Setup)
Fuel range calculation (EIS)
Altitude and Vertical
Speed***
Feet*
Meters
All altitudes on MFD
All elevations on MFD
Altimeter
Vertical Speed Indicator
VNV altitudes (Active Flight Plan)
Temperature Celsius*
Farhenheit
All temperatures on PFD
Total Air Temperature (Trip Planning Page)
Engine Indication System (EIS)
Fuel and Fuel Flow Gallons*
Kilograms
Liters
Pounds
Fuel parameters (Trip Planning Page) Engine Indication System (EIS)
Weight Kilograms
Pounds*
Weight Planning Page N/A
Position HDDD°MM.MM’*
HDDD°MM’SS.S”
MGRS
UTM/UPS
All positions N/A
* Default setting
Table 1-1 Display Units Settings (System Setup Page)
To change a Display Units setting:
1) While on the System Setup 1 Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the desired field in the Display Units Box.
3) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired
unit is highlighted. Press the CLR Key to cancel the action without changing the units.