Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
492
APPENDIX A
DATABASE MESSAGE ADVISORIES (CONT.)
Message Comments
DB MISMATCH
– Terrain database
mismatch.
The PFDs and MFD have different terrain database versions or types installed. Install correct
terrain database version or type in all displays.
DB MISMATCH
– Obstacle
database mismatch.
The PFDs and MFD have different obstacle database installed. Install correct obstacle
database in all displays.
NAV DB UPDATED
– Active
navigation database updated.
System has updated the active navigation database from the standby navigation
database.
TERRAIN DSP
– [PFD1 or
MFD1] Terrain awareness display
unavailable.
One of the terrain or obstacle databases required for HTAWS in the specified PFD or MFD
is missing or invalid.
GMA 350H MESSAGE ADVISORIES
Message Comments
GMA1 FAIL
– GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
system should be serviced.
GMA XTALK
– GMA crosstalk error
has occurred.
An error has occurred in transferring data between the two GMAs. The system should be
serviced.
GMA1 CONFIG
– GMA1 config
error. Config service req’d.
The audio panel configuration settings do not match backup configuration memory. The
system should be serviced.
MANIFEST – GMA1 software
mismatch, communication halted.
The audio panel has incorrect software installed. The system should be serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
The audio panel self-test has detected a problem in the unit. Certain audio functions may still
be available, and the audio panel may still be usable. The system should be serviced when
possible.
GIA 63H MESSAGE ADVISORIES
Message Comments
GIA1 CONFIG
– GIA1 config error.
Config service req’d.
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The system should be serviced.
GIA2 CONFIG
– GIA2 config error.
Config service req’d.
GIA1 CONFIG
– GIA1 audio config
error. Config service req’d.
The GIA1 and/or GIA2 have an error in the audio configuration. The system should be
serviced.
GIA2 CONFIG
– GIA2 audio config
error. Config service req’d.
GIA1 COOLING
– GIA1
temperature too low.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to warm
up to operating temperature.
GIA2 COOLING
– GIA2
temperature too low.