Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B326
HAZARD AVOIDANCE
Atthecompletionofasuccessfulweatherdatarequest,therequeststatuswindow(ifstillopen)willindicate
‘OK’.
Cancelling a GFDS Weather Data Request in Progress:
1) Select the Weather Data Link (GFDS) Page.
2) Press the
MENU
Key.
3) With ‘GFDS Data Request’ highlighted, press the
ENT
Key.
4) Turn the large
FMS
Knob to select ‘CANCEL REQ’ and press the
ENT
Key. The request status box indicates
‘Request Cancelled’.
5) Press the FMS Knob to return to the Weather Data Link (GFDS) Page.
ThepilotcanscheduleGFDSdatarequeststorecurautomatically.Autorequestsremainenableduntilthe
pilotdisablesthem,ortheG1000Hpoweriscycled.TheRequestStatuswindowwillindicateacountdown
timeruntilthenextautomaticdatarequestoccurs.
NOTE: If automatic GFDS data requests were enabled prior to the system entering Reversionary Mode, the
automatic weather data requests will continue in Reversionary Mode, however the GFDS Data Request
window and its associated options will not be available.
Enabling/disabling automatic GFDS Data Requests:
1) Select the Weather Data Link (GFDS) Page.
2) Press the MENU Key.
3) With ‘GFDS Weather Request’ highlighted, press the
ENT
Key.
4) Choose the desired weather coverage options.
5) Turn the large FMS Knob to select the ‘UPDATE RATE’ setting. Then turn the small FMS Knob to highlight the
desired automatic update frequency (OFF, 5 Min, 10 Min, 15 Min, 20 Min, 25 Min, 30 Min, 45 Min, or 60 Min),
then press the ENT Key.
6) The ‘SEND REQ” button is highlighted and a countdown timer is displayed in the ‘REQUEST STATUS’ based on
the currently selected update rate. Press the ENT Key to immediately send an immediate GFDS Data Request.
Or:
Press the FMS Knob to return to the Weather Data Link (GFDS) Page.
 previous next