Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
17
SYSTEM OVERVIEW
Level 1 Level 2 Level 3 Description
PFD
Displays second-level softkeys for additional PFD configurations
SYN VIS
Displays the softkeys for enabling or disabling Synthetic Vision
features
PATHWAY
Displays rectangular boxes representing the horizontal and
vertical flight path of the active flight plan
SYN TERR
Enables synthetic terrain depiction
HRZN HDG
Displays compass heading along the Zero-Pitch line
APTSIGNS
Displays position markers for airports within approximately
15 nm of the current aircraft position. Airport identifiers are
displayed when the airport is within approximately 9 nm.
DFLTS
Resets PFD to default settings, including changing units to standard
WIND
Displays softkeys to select wind data parameters
OPTN 1
Wind direction arrow and speed
OPTN 2
Wind direction arrow with headwind and crosswind components
OPTN 3
Wind direction arrow with direction and speed
OFF
Information not displayed
DME
Displays the DME Information Window (optional)
BRG1
Cycles the Bearing 1 Information Window through NAV1, GPS/ waypoint
identifier and GPS-derived distance information, and ADF/frequency
HSI FRMT
Provides access to the HSI formatting softkeys
360 HSI
Displays the HSI in a 360 degree view
ARC HSI
Displays the HSI as an arc
BRG2
Cycles the Bearing 2 Information Window through NAV2 or GPS
waypoint identifier and GPS-derived distance information, and ADF/
frequency.
SET HDG
Enables Heading Preset Mode
HDG SYNC
Synchronizes heading to the selected heading
HDG -
Slews heading counterclockwise
HDG +
Slews heading clockwise
HPM OFF
Manually disables Heading Preset Mode
ALT UNIT
Displays softkeys for setting the altimeter and BARO settings to
metric units
METERS
When enabled, displays altimeter in meters
IN
Press to display the BARO setting as inches of mercury
HPA
Press to display the BARO setting as hectopacals
STD BARO
Sets barometric pressure to 29.92 in Hg (1013 hPa if METRIC softkey is
selected)
OBS
Selects OBS mode on the CDI when navigating by GPS (only available
with active leg)